Ensure your tires are in optimal condition with precise alignment services at Muffler and Go Full Auto & Transmission. Properly aligned tires not only extend their lifespan but also enhance your vehicle's handling by preventing it from "pulling" to one side. Our certified tire specialists employ state-of-the-art equipment to meticulously inspect your tires for signs of uneven wear, cracking, or slow leaks.
If uneven tread patterns start appearing on your tires, it's likely time for a wheel alignment. This complex process involves adjusting your wheels' angles to match the specifications set by your vehicle's manufacturer.
Alignment Services Wheel alignment is crucial for your car's health. Our expert technicians meticulously adjust your wheels to the manufacturer's specifications, ensuring optimal steering and tire performance. This prevents unnecessary wear and tear, saving you money in the long run.
Benefits of a Professional Wheel Alignment
Regular wheel alignments offer a range of benefits that keep your vehicle in optimal condition:
Improved Safety: Proper alignment enhances handling, reducing the risk of accidents.
Increased Tire Life: Evenly aligned wheels prevent premature tire wear, saving you money in the long run.
Better Fuel Efficiency: Misaligned wheels can increase rolling resistance, causing higher fuel consumption.
Smoother Driving Experience: Alignment issues can cause vibrations or pulling; fixing them restores comfort on the road.
Alignment FAQs
How long does a full alignment take?
A wheel alignment usually takes about an hour for both two-wheel and four-wheel drive vehicles. However, if there is significant wear and tear on suspension components like bushings, track rods, or the alignment system itself, replacement parts may be needed, which could extend the service time.
What happens if you wait too long for an alignment?
Delaying a wheel alignment can negatively affect your tire performance and lifespan. Even slight misalignments, which are imperceptible to the eye but measurable in small degrees or fractions of an inch, can cause uneven and premature tire wear. Over time, this wear becomes more noticeable, impacting safety and fuel efficiency. To prevent these issues, it's recommended to have your alignment checked every 6,000 miles.
What is checked during an alignment?
During a tire alignment, three key angles are examined: camber, toe, and caster. Camber refers to the angle between the vertical axis of the tire and a line perpendicular to the road surface when viewed from the front. If the top of the tire tilts inward, creating an "X" shape between the wheels, it's known as negative camber, which can cause excessive wear on the inner edge of the tire due to increased friction.
Do I need an alignment after replacing tires?
Yes, you do! Proper wheel alignment ensures that the angles between your tires and the road surface are accurate, which helps to maximize tire life, improve handling, and ensure even tread wear. This not only boosts fuel efficiency and driving safety but also enhances your overall driving experience.
Don't let uneven tire wear diminish the longevity of your tires. Experience a fast and cost-effective tire alignment at our shop in Fenton. Call us today at 810-629-1066 to schedule an appointment.
To learn more about our Alignment services, call us at 810-629-1066 or request a quote by clicking below:
I’ve been going to Muffler and Go for quite some time now. Chris and the guys are the best! They are honest and friendly. I recommend them to everyone I know.
debra ganske, 08/27/2025
This review covers work performed by Muffler & Go (M&G) over the summer of 2025 on 3 different vehicles our household owns.
The first car was my son's 1969 Plymouth Barracuda, which he purchased with a relatively new exhaust system already installed. The exhaust components themselves were great but the installation was awful. We brought the car to M&G to have the dual exhaust removed, pieces modified (cutting, bending, welding) and reinstalled by Kevin (their top custom exhaust specialist). The result was truly a work of art. The exhaust was routed through some tight areas in a way where nothing rubbed, rattled or was in the way as it had before.
Because of the work done on my son's car, I decided to bring in my newly restored (after sitting 37 years) 1968 Chrysler New Yorker to have its dual exhaust system completely replaced. Again Kevin was given the job, this time to create a complete custom stainless steel exhaust system. Somehow Kevin was able to route the pipes to fit through some tight areas and tuck the pipes and mufflers very close to the bottom of the car in a way that honestly looks better than what the factory had done. I later found a slight rattling that only occurred under certain conditions and the owner, Chris Burke, told me to bring it in and he'd have it taken care of while I waited, which they did. Within two weeks of the installation, I then realized the mufflers that were chosen were just a bit too loud for me. Since I originally agreed with M&G to install these particular mufflers, I thought I was going to have to pay to exchange them for quieter ones. However Chris offered to exchange them for a quieter pair free of charge (for both the mufflers and the labor to exchange them). You just can't ask for better customer satisfaction efforts than this! I am now super happy with the sound and the quality of the installation.
The third car we brought in was my son's daily driver, a 2014 Chevy Equinox with the Ecotec 2.4 inline 4 cylinder. Because we brought it in to M&G with a potentially damaging loose timing chain (a VERY common problem on this engine), Chris said it was an urgent issue and arranged to get in right away. Eventually the timing chain and associated components were replaced along with a new engine valve cover with integrated PCV, oil & filter and spark plugs. Got my son's car back on the road within two days and averted potential disaster from a broken timing chain. Later, we took the Equinox in again for a cooling system flush, brake system flush, two wheel alignment, replace all brake rotors & pads and replace parking brake shoe & lining w/ parking brake kit before my son drove back to college 500 miles away.
We've decided to switch all of our car service needs over to Muffler & Go after seeing the quality of work that they do and Chris taking considerable time to show me around the shop, explain the way they find parts as inexpensively as possible and introduce me to their service specialists. The front desk and waiting area is immaculate and reflects Chris's need for neatness and order. The shop area is well organized and you can tell everything is well maintained. They also have the latest in diagnostic testing equipment so they're able to perform service on many things other shops may not be able to do.
In terms of pricing (as the owner will also tell you) they aren't the cheapest or the most expensive. Based on what I have experienced over the years at this and other shops, I'd say their pricing is in line with what you'd expect from a shop that uses the right parts and does an exceptional job of installation & servicing. There's a great deal of automotive expertise in their employees and Chris himself told me he works hard to treat them well in order to keep them. I've long known Muffler & Go has a great reputation and I now know why.
Their business name is Muffler & Go but it is obvious that they do much more than exhaust systems. I'm one of their newest customers and I can say I'm 5 star satisfied so far.