AUTONET TV

Keeping Yourself in Suspension (Control Arm Assembly Replacement)

When you are pointing your vehicle straight down the street, it should go straight.  That’s pretty straightforward, right? Sometimes, though, you may notice you have to keep adjusting the steering wheel to keep going straight.  While that could be caused by many different issues, one possibility is that you have a failing or bent control arm.

Another sign is that when you brake, your vehicle pulls to one side or the other.  Sometimes your suspension may sound noisy, especially when you’re traveling on rough surfaces.  A damaged control arm may also make it almost impossible for you to get a good wheel alignment. 

The control arms are part of your suspension, and some vehicles have upper control arms and lower control arms.  Not all have the same number of control arms, but one thing is important: If you have worn bushings on your control arms or a worn-out ball joint, the control arm on the other side should also be replaced.  The rubber bushings are susceptible to damage from age and exposure to the elements, and ball joints usually shouldn’t be replaced separately. 

Any time you have a suspension issue, it’s important that a technician inspects the other parts of your suspension as well.  If one part of it is showing its age, it’s not unusual for other components to show similar wear.  

One other thing.  If you’ve had one of your control arms bent or damaged in an accident, you must have it replaced.  Your suspension is an important part of your vehicle’s safety and handling, so you should keep it in good operating condition.  After all, your life is riding on it, literally.   

Muffler & Go
1478 N Leroy St
Fenton, MI 48430
(810) 629-1066
http://www.mufflerandgo.net

Things Aren't Always What They Seem

If you drive, you know at some point, something's going to go wrong with your vehicle.  And sometimes, it's pretty easy to figure out what's wrong, like a flat tire.  But sometimes your vehicle's symptoms can be really puzzling.

One driver in MI was heading to work on a hot July day and noticed when he pressed the accelerator, sometimes it wouldn't do anything. He also noticed his cruise control wouldn't work and his traction control light was constantly on, very unusual.

He was trying to figure it out, but none of it made any sense.  His cruise control had always worked perfectly, his traction light never had gone on before and there was never any issue pressing on the accelerator.

It was time to take his car in for a professional diagnosis, and boy, was he surprised that it was a freak accident he'd had the previous WINTER that was the root of his problems.  You see, in January, his car had slipped on ice when he was in reverse and had gently tapped a tree.  That caused a tiny crack in his rear stoplight. 

That crack had gone unnoticed until that July day.  Turns out a summer rain allowed water to seep into the taillight casing, so this time when he drove to work, there was enough moisture inside it to cause his stop light to stick on.

When the stop light is on, the car's computer is programmed to act as if the driver is pressing the brakes. It also disables the cruise, accelerator and cruise control when the brakes are on, producing all of the symptoms.  Replacing the stop lamp switch fixed everything.

So, while some things that go wrong with your vehicle are pretty obvious, many seemingly defy all logic. That's when a trained technician can scope things out, replace the right part and get you going again.

Sounds Like a Hot Rod (Noisy Exhaust System)

Driving along, your exhaust system's rumbling so loud that people turn and stare at you pass by.  You're wondering when the police are going to pull you over for illegal noise.

Your mind immediately thinks, aha! A broken muffler. 

Well, your exhaust system is composed of many more parts than just a muffler. 

Your engine makes power because of thousands of tiny explosions from detonating fuel.  Those explosions make a racket, so engineers came up with a system that acoustically dampens that sound in addition to getting rid of harmful exhaust.

In the engine is the exhaust manifold that looks like several pipes that join up into one pipe.  It directs exhaust to the catalytic converter. The catalytic converter converts harmful gases into less harmful gases using certain chemical reactions.  Then comes the muffler that has baffles inside to quiet the sounds of your engine noise.  Finally: the tailpipe.

All of those pipes and parts are joined together by clamps and held up by brackets, and they ride over some pretty bumpy roads.  They are also exposed to the elements, like salt, water, rocks and grit.  Chances are that one of those clamps or brackets has been weakened by corrosion.  When you hit a bump, bingo! The crack widens into a gap and there's a spot for the engine noise to come roaring out instead of being directed into the muffler's quieting chambers.

You might be surprised to know that the exhaust system can rust from inside out.  How? Moisture is one component of exhaust, and moisture on the inside can do the same kind of damage as moisture from the outside. 

It's a good idea to have your exhaust system looked at regularly by a technician.  He or she can evaluate the condition of the metal and recommend when it might be time to replace parts before they break.

Then you'll have a decision to make.  Newer exhaust systems are made out of stainless steel that is much less prone to corrosion issues.  Others are made of aluminized steel that also fights rust.  You've probably already guessed that they can cost more, but the extra price up front may give you an exhaust system that will last much longer. 

Sure, with a repaired exhaust system, you won't have quite the head-turning vehicle you once had.  You'll just have to live with all the quiet.

Muffler & Go
1478 N Leroy St
Fenton, MI 48430
(810) 629-1066
http://www.mufflerandgo.net

No Fueling! (Fuel Filler Location)

If you've ever gotten in an unfamiliar vehicle, maybe a rental car, you may have pulled up to the gas pump and wondered, "Which side is the fuel filler on?" Here's a tip for you.  There is usually a little arrow on the instrument panel near the fuel gauge that points to the side where the fuel filler is. 

But why are the fuel fillers not all on the same side, anyway? There are lots of reasons.  At one time, many manufacturers tried putting them in an easy-to-reach spot: in the center of the vehicle's rear end.  Some even hid them behind a hinged license plate door.  Cool place, but it turned out not to be a good idea.  When a vehicle with a fuel filler in the rear was hit by another vehicle from behind, it was much more prone to catch fire and explode.

Safety regulations now dictate that the fuel filler doors be placed within crumple zones and away from where they can drip fuel on hot exhaust pipes or near electrical connections.  But why do manufacturers put them on either side?

Some say it should be on the side away from the road.  That way if you run out of gas and have to add a little from a gas can as your standing at the side of the road, you'll be a little farther away from passing traffic.  So some companies from North America and many European firms with left-hand drive put their fillers on the right side.

Some manufacturers think convenience for the driver is paramount, so they put their fuel fillers on the driver's side.  If you have a vehicle with a cable release for the fuel door inside the cabin, it's usually on the same side as the steering wheel.  As you can see, there's no standardization.

Fuel doors need regular maintenance such as lubrication, and your gas cap (if your vehicle has one) should seal properly.  Have your service facility inspect those regularly. Wherever your fuel filler is, it's obviously important that you can get at it easily because you have to fuel up sometime. Otherwise, you're not going to go too far!

Muffler & Go
1478 N Leroy St
Fenton, MI 48430
(810) 629-1066
http://www.mufflerandgo.net